Pneumatic chamfering tool – Circuit Beveler Model CB-01
Circuit Beveler Model CB-01 is a Pneumatic chamfering tool. This tool operates with two disposable indexable inserts, and can chamfer straight and curved edges, and hole edges on mild steel products such as machined parts and molds.
- The design purpose of Model CB-01
Chamfering burrs on workpieces such as machined parts and molds reduces operators’ hand injuries while they handle the workpieces. Moreover the quality of the chamfering is much improved. Due to these reasons the chamfering work on the workpieces is increasing at the site of processing. Model CB-01 is completely compact, which has not compromised its powerful drive. 3. Specifications
Air Pressure 0.6 MＰa
Air Consumption 0.15m³/min
Free Speed 28,000min⁻¹
Chamfering Capacity 0C-1C mm Mild Steel
Chamfer Angle 45°
Minimum Plate Thickness 1.5 mm
Minimum Hole Diameter for Chamfering 6.8 mm dia.
Minimum /chamfering Depth 6mm
Mass (Weight) 0.5 kg
Comparison with Machining Center (MC)
・ MC: Programming for chamfering work is required.
CB-01: Just place CB-01 on the edge to be chamfered. No need for preparation.
・ MC: MC should not be used for light-chamfering work in order to increase the rate of its operation.
CB-01: While waiting for the MC to finish processing work, an operator can finish light-chamfering work with CB-01.
Comparison with Grinders
・ Grinder: Chamfered surface is uneven and looks bad.
CB-01: Chamfered surface is even and smooth, and looks fine.
・ Grinder: Secondary burrs are caused by grinding.
CB-01: No secondary burr is caused by chamfering.
・ Grinder: Can be bulky and awkward to handle.
CB-01: Easy operator use – safe and easy to handle and use.
・ Compact and lightweight model enhances operator’s productivity. The downsized guide plate enables an operator to perform chamfering work in confined areas.
・ A newly developed energy-saving and high efficient motor provides high output power, yet low air consumption.
・ The long life motor is cost-effective in maintenance.
・ Easy replacement of indexable insert.
・ Elongated hole edges and curved edges can be chamfered.
Expected work sites to be used.
・Die and mold manufacturing
CB-01 will be mainly used in the above-mentioned work sites. This tool can be used wherever burrs are caused during processing work in the industries ranging from precision machinery industry to heavy industry. It can be expected that this tool will be much more used in the applications of elongated hole edges and curved edges rather than straight edges.
See or other Nitto tools