Moleroda Finishing Systems

Felts, abrasives, tools and equipment for polishing and deburring

  • Catalogue
  • Shop
  • My Account
    • Checkout
    • Basket
    • Terms & Conditions
    • Privacy Protection Policy
    • GDPR Data Protection Policy
  • Delivery
  • Payment
  • Contact: +44 (0)1722 711988
MENUMENU
  • Mounted Tools
    • Carbide Burrs
      • Carbide Burr Sets
      • Carbide Burrs on 3mm Shank
      • Carbide Burrs on a 6mm Shank
      • Micro Carbide Burrs on 2.35mm
    • Coated Abrasive Products
      • Abrasive Jiffy Caps
      • Cartridge rolls
      • Mounted Abrasive Flapwheels
      • Quick-Change Discs
      • Roloc Discs
      • Spirabands & Holders
      • Twist N Lok Discs
      • Velcro & Self Adhesive Discs
    • Diamond Points and Wheels
      • Diamond Points on 3mm – BM Series
      • Diamond Points on 2.35mm Shank- HP Series
      • Diamond Points on 1.6mm – FG Series
      • 20 Piece Diamond Point Set
      • 30 Piece Diamond Point Set
    • Mounted Polishing Products
      • Mounted Bobs, Cones & Shaped Felts
      • Mounted Felt Wheels
      • Mounted Calico, Cotton Yarn, Chamois Mops
      • Mounted Wire & Bristle Wheels, Cups and Pencils
      • Mounted Wooden Lapping Sticks, Bobs & Cones
    • Mounted Wire Tools
      • Mounted Wire Tools
    • Non-Woven Abrasives
      • Abrasive Nylon Filament Wheels
      • Mounted Abrasive Nylon
      • Mounted Cotton Bonded MX
      • Mounted Unitized Wheels and Points
    • Plastic / Rubber Abrasives
      • 3M Radial Wheels
      • Mounted Cratex
      • Mounted Rubber Points
    • Vitrified Mounted Grinding Points
      • Vitrified Mounted Grinding Points
      • Xebec Extended Deburring Points
    • Sunburst by Dedeco
  • Compounds
    • Compounds Overview
    • Diamond Polishing / Lapping
      • Diamond Compound
      • Diamond Spray
      • Lapping Fluid – Suitable for use with Diamond products for polishing
    • Metal Polishing Compounds
      • Coarse metal Cutting Compounds
      • Medium Cut & Colour Compounds
      • Mirror Finishing Compounds for metal
      • Small Polishing Compound Bars
    • Lea Satene Bars
      • Lea Satene Compounds
      • NO3 Black Jack Glue
    • Dialux & Rouge Bars
      • Rouge Polishing Compound for Precious metals
      • Dialux Polishing Compounds
    • Plastics and Veneers
      • Polishing compounds - plastic, Veneers
    • Polishing Pastes
      • Polishing Pastes
      • Clover Grinding Compound
      • ULTRALAP Lapping Compound
    • Polishing Powders, Lubar & Grainlock
      • Vienna lime and Lubar
      • Pumice and Cerium Oxide
      • Grainlock Cold Cement – HD
    • Schmidts & Cannings Compound Bars
      • Hyfin – Cannings Polishing compound
      • Ultrapol 76 Polishing Compound
    • Specialist Sprays, Protection & Cleaners
      • Spray Solvent Cleaner
      • Clear Lacquer
      • Antox Pickling Paste
  • Consumables
    • Polishing Kits
      • Drill Polishing Kits
      • Small Mounted Polishing Kits
      • Mop Kits
      • Angle Grinder Polishing Kits
    • Mould Polishing Stones & Lapping
      • Congress Mould Polishing Stones
      • Ultra Fine Ceramic Stones
      • Stone Holders
      • Lapping Sticks and Pads
      • Other Stones and Kits
    • Files / Fettling Tools
      • Swiss Needle Files Vallorbe
      • Diamond Files and Dressers
      • Riffler Files
      • Abrasive Belt Sticks
      • Emery Sticks
      • Quick Zip Abrasive Strips & Files
    • Abrasive Hand Tools
      • Matador Wet and Dry Sheets
      • Abrasive Nylon Scotch Hand Pads
      • Abrasive Nylon Roll
      • Hermes Economy Roll
      • Gesswein abrasive polishing sheets – very fine Micron paper
    • Mops & Wheels
      • Polishing Mops
      • Unmounted Felt Products
      • Abrasive Nylon Wheels
      • Abrasive Wheels
      • Bristle and Hair Wheels
      • Wire Wheels - Brass, Steel, Nylon
    • Angle Grinder Attachments
      • Keyway Flapwheels
      • Abrasive Discs for Angle Grinders
      • Angle Grinder Backing Pads / Holders
      • Depressed Centre Dishes
      • Grinding and Cut Off Wheels
      • Jost Pipe cleaner
    • Abrasive Linishing Belts
      • Abrasive Belts for Expanda Wheels
      • Expander Wheels – Tapered Bore
    • Specialist Deburring and Fettling
      • Ceramic Deburring Tool (Knife)
      • Flex-Hones for Internal Bore Finishing
      • Nylon Tube Brushes
      • Glass & Brass Fibre Pencils
    • Micro-Mesh the cushioned abrasive
      • Micro-Mesh - Kits to Use By Hand
      • Micro-Mesh - Kits Used With a Tool
      • Micro-Mesh Discs
      • Micro-Mesh Sheets
      • Micro-Mesh Rolls
      • Micro-Mesh Flexifiles
      • Micro-Mesh Pads & Swabs
      • Micro-Mesh Accessories
    • RODA
      • RODA Felt
      • RODA NyWheel
      • RODA NyMop
      • RODA Point
  • Tools / Equipment
    • Mandrels, Pigtails & Tapers
      • Keyway and Blowup Tyre for Grinders
      • Mandrels Without Taper
      • Tapered Mandrels
    • Electric tools
      • Micromotor Systems
      • Bench Polishers & Grinders
      • Flexible Shaft Machines
      • Electric Power Tools & Grinders
      • Micro-Mesh Liquids & Compounds
    • Air (Windy) Tools
      • Die Grinders
      • Reciprocators & Filers
      • Belt Sanders
      • Orbital Sanders & Engraving Pens
      • Air Tool Accessories
    • Welding Equipment
      • Mould Tool Repair Welding
      • Laser Welding
      • Welding Wires
      • Weld Cleaning
    • Shot Blasting Equipment
      • Cabinet Shot Blasting
      • Micro Shot Blasting Units
      • Shot Blasting Media
    • Ultrasonic Cleaning Tanks
      • Industrial ultrasonic cleaning tanks 2.5 Litre Capacity
      • Joke Ultrasonic Cleaning Tanks
      • Ultrasonic cleaning liquid
    • Spinner magnetic deburring and polishing machine
    • Safety & Lighting
      • Extraction and Dust Hoods
      • Lights & Magnifiers
      • Optivisors
      • Work Holding Vices
      • Safety, Protective Clothing
  • Rosler Vibratory Finishing
    • New Vibratory Finishing Machines
      • Rosler Powerful Mini Machines
      • Vibro bowls with separation
      • Small Vibro tubs & Bench top systems
      • Rosler Trough Machines
    • Vibratory Finishing Media and Compounds
      • Rosler Ceramic Media
      • Rosler Liquid compounds
      • Rosler Plastic Media
      • Rosler Polishing Media
    • Rosler Shot Blasting
      • Batch Tumble Belt, Hanging Rail, Continous Feed Wire Mesh Belt Machines
    • Rosler UK (machinery by Rosler)
      • Rosler Drag Finishing system
      • Centrifugal (Disc) Finishing Machines
      • Metal Component Mass Drying Systems
      • Rosler waste water system
  • Products & Sale Items
    • 3D Printing & AM
    • Plastic & Non metals
    • Casting
    • Precision Engineering
    • RODA
    • Fabrication
    • Mould Tools
    • Jewellery Tools
    • Polishing Kits
      • Aluminium Polishing Kits
      • Steel Polishing Kits
    • Clearance Sale

Deburring Tools

Deburring, Edge Breaking, Chamfering, Cross Hole Deburring

Deburring Tools, edge breaking, chamfering, thread deburring and tricky cross hole deburring. The deburring tools made and supplied by Moleroda cover a huge range and are both for automatic and manual deburring.  

Moleroda has noticed a change in precision engineering industry. Machining centres are getting more and more complex. Many components are becoming more intricate with tighter tolerances. That is why the deburring tools made and supplied by Moleroda are suitable for a huge range of modern-day industries and applications. 

In Medical, aerospace, automotive, oil and gas industries we find that the components have many features and are expected to be finished and burr free to a high standard.

Moleroda supplies every tool for every type of finish. The idea being to help you get your machined components out of the door and finished to a high standard as quickly and as economically as possible.

Browse our extensive range of Deburring Tools below.

WATCH: Take a look at our RODA Range to see our UK made products which are ideal for deburring and finishing.

file

Hand Deburring tools

Hand deburring tools are generally very traditional. We sell a range of scrapers and edge breaking tools. Diamond Files, Needle files, Riffler files etc. 

Read More
edge breaking

Rotary tools for edge breaking

General deburring of sharp edges and burrs in holes using a rotary drill and grinding points. 

Read More
radial disc deburring internal thread

Deburring Threads

Internal or external threads can be tricky. A flexible tool is important to hit the top and bottom of the thread.

Read More
xebec Cross hole deburring tool

Cross Hole deburring

Cross holes are often time consuming to deburr, they are hard to reach and there was  not a huge options of tools ---- until now!

Read More
3M Radial Wheels - 150mm diameter

Deburring Equipment

Different machines are available for different applications, from bench grinders to precision drills.

Read More
Rosler Drag Finishing and polishing

Automatic deburring

Manual process are costly and time consuming and no matter how good the person is it’s hard to be consistent. Robotics are becoming more common place in factorys or in sequence deburring and Vibratory finishing is a very cheap way of processing  batches of components.

Read More

Hand Deburring Tools

Hand deburring tools are a very traditional method of deburring this normally occurs while the engineer is waiting for the next job to finish. We sell a range of scrapers and edge breaking tools.

  • Ceramic knives – this is our biggest seller. These light weight knives leave a very smooth finish on aluminium, brass and plastics. They are also much safer than using metal scrapers and scalpel blades. Take a look at our video demonstrating these knives in action. 
  • Twist in wire – for cross hole deburring and bore cleaning.
  • Glass and brass pencils – these little scratch pencils are great for brushing and removing burrs down slots.
  • A good old file – diamond files, needle files and shaped Riffler files are a workshop must have.
  • Abrasive Rubbing Blocks

    Abrasive Rubbing Blocks – GARRYFLEX

    £5.37 incl VAT
    Select options
  • Ceramic Deburring Tool (Knife)

    £28.99 – £34.26 incl VAT
    Select options
  • Glass & Brass Fibre Pencils

    Glass & Brass Fibre Pencils

    £1.85 – £6.72 incl VAT
    Select options
  • Twisted in Wire Cross Hole Deburring Brushes

    £5.70 – £10.31 incl VAT
    Select options
  • Diamond Needle Files

    £10.16 – £12.36 incl VAT
    Select options
  • Swiss Riffler Files

    Individual Swiss Riffler Files Grobet / Vallorbe (15cm)

    £25.60 – £29.80 incl VAT
    Select options
  • Precision Needle files

    Precision Needle Files Swiss Grobet / Vallorbe 16cm

    £7.74 – £16.42 incl VAT
    Select options

Rotary deburring tools for edge breaking

General deburring tools for sharp edges and burrs in holes – many people use an air pencil grinder with carbide burrs but we are trying to move our customers away from this. Most components when they reach the deburring bench are already of  high value, there is no need to attack it with a cutting tool – Is the scrap bin looking full! This is also a two-step process 1. Carbide burr 2. A scotchbrite hand pad to improve the surface finish.

Our method of deburring tools – one step – use an abrasive which will not damage the part, which will remove the burr cleanly and leave a good bright surface finish. – MX, Unitized or our Nylon wheels will do this job. Saving time and money.

  1. MX GFX points – these cotton hard bonded points are excellent for edge breaking on steel and stainless steel, cuts well and leaves a great finish.
  2. Unitized – can be used on any metal, leaves a good finish, can be shaped to fit the application. Cheaper than MX points but similar product.
  3. Nylon Abrasive wheels – we have 9 scotchbrite grades so from plastic, rubber, to Inconel and hard steels these will work for you, deburring and blending machine lines. Our biggest international sellers. These deburring tools can also be used in bores and on threads.
  4. Carbide burrs – How heavy is the burr! If you need to cut it off then burrs are the best of the job. Make sure your tools is running fast enough for a smoother cut and finish.
  5. Pink points – we offer a good range of shapes – particularly the ball shapes are good for deburring break holes in one hit.
  6. Rubber points – for plastic and aluminium light points that leave a brighter finish.
  • Quick Change discs – Surface Conditioning (Abrasive nylon)

    £60.60 – £144.64 incl VAT
    Select options
  • MX Mounted points

    RODA MX Points – For grinding and blending metal

    £33.84 – £48.55 incl VAT
    Select options
  • Mounted Abrasive Nylon Wheels on a 3mm Spindle

    RODA NyWheels – Mounted Abrasive Nylon Wheels on a 3mm Spindle

    £16.30 – £19.90 incl VAT
    Select options
  • RODA Unitized Points

    £19.19 – £29.29 incl VAT
    Select options
  • Abrasive Caps

    Abrasive Caps (Jiffy Caps)

    £11.16 – £89.27 incl VAT
    Select options
  • Abrasive Mounted Points

    Abrasive Mounted Points – W Parallel shape Pink Vitrified points

    £13.67 – £17.70 incl VAT
    Select options
  • F-Shape Carbide Burrs

    F-Shape (Tree – Radius)

    £6.90 – £11.11 incl VAT
    Select options
  • Mounted Rubber Points

    Mounted Rubber Points W-Shape (Per 10)

    £11.50 – £18.99 incl VAT
    Select options

Tools for Deburring Threads

Internal or external threads can be tricky. A flexible tool is important to hit the top and bottom of the thread. We have a range of deburring tools for threads:

  1. Radial discs – a plastic flap wheel the 19mm are great for fine thread and the 80g is good on aluminium and light burrs on stainless. can be used for polishing threads - down to 1 micron. 
  2. Abrasvie Buff Balls - These come in a range of grits so suitable for most application. They can be used on blind holes as the nylon covers the bottom end. 
  3. Abrasive nylon wheels – harder abrasive nylon wire are good for tougher burrs.
  • Grit Impregnated Nylon

    Grit Impregnated Nylon Wheels 22mm Dia on 2.35mm

    £31.34 incl VAT
    Select options
  • Radial Discs

    Small 3M Radial Discs (19mm & 25mm)

    £1.04 – £1.26 incl VAT
    Select options
  • Small Abrasive Nylon Buffing Balls

    Small Abrasive Nylon Buffing Balls

    £9.92 – £23.54 incl VAT
    Select options

Cross Hole deburring tools

Cross holes are often time consuming to deburr, they are hard to reach and there was not a huge options of tools ---- until now!

  1. XEBEC extended tools – theses small ceramic balls and cylinders start at 3mm dimeter with a slim flexible shank, they are excellent for hard to reach cross holes. They are long lasting and leave a smooth 400g finish. Best used with our Eneska 4-1 with a foot control for delicate bores.
  2. Twist in wire – Flex hones and twist in wire  offer brushes in a huge range of sizes and grades so they are suitable for any bore and cross hole application.
  • Deburring Abrasive Nylon Tube Brushes

    Deburring Abrasive Nylon Tube Brushes on 6mm Shank (GTS)

    £6.32 incl VAT
    Select options
  • XEBEC Extended Deburring Tools – Cross hole deburring tool

    £18.92 – £32.74 incl VAT
    Select options

Deburring Equipment

The deburring tool you chose to use is only going to work as well as the machine you run it in. Burrs for example will not cut well if they are not run at the correct speed. We offer a huge range of tools which vary in quality and price.

  1. Air tools – these general have a fixed speed or when speed is lowered then torque is lost. They are cheap to run and easy to use. See our fast running pencil grinder to use with burrs, this is a cheaper option.
  2. Micro motors – these machines have improved a lot over the year. Most have excellent torque and variable speed control. When using abrasives they will last longer at slower speeds, torque will still be high at slow speeds. Micro motors have lower vibration and noise so offer much more control and have more safety stop options. Extra features like a foot control and reverse rotation allow the operator to have better feel to manipulate the process.
  3. Bench Grinders / polishers with either a deburring wheel, radial wheel or nylon style wheel allow you to hit a bigger surface area in one go. Moleroda offer a range of machines and consumables. 
  4. Pendant motors - These machines are very cost affective but reliable, if you have a small budget then this is a good option. 

No more Dremel /Hobby tools for precision engineers!

  • Bench Polisher DMS 200 - 900w 230v

    Bench Polisher DSM 150, 520w 230v Kit for Deburring or Polishing

    £5.37 – £277.94 incl VAT
    Select options
  • Pendant Motor

    LY128 Pendant Motor

    £6.40 – £190.61 incl VAT
    Select options
  • Micro Pencil Grinder

    Micro Pencil Grinder fast speed PUMA AT-3180 – 70,000rpm

    £119.40 incl VAT
    Add to basket
  • NSK Air Grinder – Impulse NSP-601

    £659.48 incl VAT
    Add to basket
  • NSK micromotor

    EneskaMicro 600 set NSK micromotor Eneska handpiece and motor for polishing, de-burring and finishing.

    £1,900.79 incl VAT
    Add to basket
  • powerful micromotor system

    Micromotor System MAX FORCE – powerful rotary drill up to 50,000 rpm with 200 Watts

    £767.55 incl VAT
    Add to basket
  • Urawa Micromotor System

    URAWA Micromotor System – Rotary Set, UC250 Control Box & Choice of Handpiece

    £811.11 – £857.33 incl VAT
    Select options

Automatic deburring

Manual process are costly and time consuming and no matter how good the person is it’s hard to be consistent. Vibratory finishing is a very cheap way to process batches  of components.

  1. Rolser machines – we offer very delicate process in vibratory finishing machines which uses very light abrasive media so allowing  high precision parts to be deburred whilst retaining  a bright machine look finish. We understand that some deburring required is only taking a sharp edge to a precision edge.
  2. In CNC sequence Or Robotic operated - More and more people are asking for tools to deburring in the machining centre sequence. With cleaver programing and good abrasives this is now readily achievable. Contact us for our advice.
  • Centrifugal (Disc) Finishing Machines for polishing and deburring

    Read more
  • Rosler Mini 30 vibratory finishing machine

    Read more

At Moleroda we understand our range of tools and we can offer bespoke tools, reliable advice and tips on how to finish your components fast and efficiently.

Call us today to speak to one of our technical team. 

Basket

New Products

  • E-Shape Carbide Burrs E-Shape Carbide Burrs (Oval) £7.00 – £11.27 incl VAT
  • Mounted Pencil brushes Mounted Pencils brushes in bristle, brass or steel for metal polishing £6.09 – £8.57 incl VAT
  • EDM 1/4 X 1/8 X 6" 500G - 12 STONES (1BOX) £44.43 £25.03 incl VAT
  • super Lapping Sticks Super Lapping Sticks £6.27 – £60.65 incl VAT

Secure Payment


PayPal Acceptance Mark

About Us

We are the country's largest felt and specialist polishing accessory manufacturer, exporting to over 20 countries and experts in polishing products in felt, diamond, wood, calicos, fine abrasive cloths, unitised material and abrasive non-woven nylon.

Recent Products

  • Continous Feed Wire Mesh Belt Shot Blaster
  • Precision Needle files Precision Needle Files Swiss Grobet / Vallorbe 16cm £7.74 – £16.42 incl VAT
  • Mounted Knife Edge Wheels Mounted Knife Edge Wheels (Felt) £8.14 – £20.23 incl VAT
  • Porcelain pins Porcelain pinsRP 04/05 ZS for Super finishing / polishing metal in a vibro bowl pre-treated Media

Advice, Tips & How To

  • Roda Nywheels nylon sanding wheel – Take a close look to see why it’s the abrasive for you
  • Household DIY with RODA
  • Achieve a super smooth finish on your wood
  • Micro-Mesh – The first choice for violin makers!
  • How to Polish 3D Laser Printed Titanium
  • Micro-Mesh Conversion Chart
  • How to Polish Copper | Guide to Polishing Copper

Contact Us

Moleroda Finishing Systems Ltd
Unit 5, Whaddon Business Park
Salisbury
Wiltshire
SP5 3HF, UK
Tel: +44 (0) 1722 711 988

Moleroda Finishing Systems Ltd | All rights reserved © 2019 | +44 (0) 1722 711988 | Contact