Engine Porting

Online Catalog | Applications - WHAT PRODUCTS SHOULD I USE FOR - - - - - -? | Engine Porting

Electric Equipment -Shown in increasing cost

Air Tool Equipment-Shown in increasing cost.

AIR TOOL EQUIPMENT SHOWN IN INCREASING COST.

Link to Carbide Burrs - First stage Cutting

To remove material and start to smooth metal.

Click here to see our full range of CARBIDE BURRS

Link to Jiffy Caps - Second Stage Abrasive points

Jiffy Caps and Spirabands are gritted rolls to be used with a mandrel in a range of shapes to allow work in all tight areas.

Click here to see our full range of JIFFY CAPS

Link to Mounted Flap Wheels - Second Stage Abrasive wheels

Flap wheels are excellent for removing material and working hard in small areas. The gritted flaps of paper are long lasting and are an high quality item. A must for any porting job!

Click here to see our full range of FLAP WHEELS

Link to Mounted MX Points - Second Stage Abrasive Points

MX is a hard wearing material. It is impregmated trroughout with grit so no extra compound needed. MX is excellent for blending and smoothing. removing lines but also leaving a good finish in one hit.

Click here to see our full range of MX POINTS

Link to Mounted Wheels - All stages of polishing

Moleroda has a huge range of mounted wheels. 25mm, 30mm and 40mm diameter are all available in felts, calico, abrasive nylon, steels and Unitized.

Click here to see our full range of mounted 25mm, 30mm and 40mm wheels