Deburring wheels
Also known as convolute wheels are excellent for finishing and cleaning up all metals. The wheels are like a compressed scotchbrite material which are excellent for deburring and cleaning they also leave a very smooth slightly sateen finish. Convolute or deburring wheels are a very popular product for any engineering workshop. These wheels are excellent for removing burrs and machine lines on all metals including steel and aluminium. Our most popular grades are 7SF for aluminium, 9SF for steels and 10SF for harder metals and titanium.
Deburring wheels are available in silicon carbide and aluminium oxide
Silicon Carbide – sharper cut and shiny finish
SVF- Very Fine
SF- Fine
SM- Medium
Aluminium Oxide – softer cutting duller finish
AF- Fine
AM- Medium
AC- Coarse
Densities from 10 (hardest)- 2 (softest)
Harder densities suit harder metals such as Steel and Titanium
Middle densities such as 7 and 8 are best for deburring softer Steels and alloys
Softer densities 4-2 for wood and plastics
9SF is most widely used on steels
7SF is used on steel and aluminium
Uses for deburring wheels:
Used for deburring all types of metal. Removes scratches, burrs, rust, smoothes ready for polishing. Used with a bench polisher.
Go for the standard option with no felt centre for fitting straight onto the shaft/arbour.Add a felt centre to use with a taper/pigtail.
Moleroda do stock a large range of these wheels both silicon carbide and aluminium oxide wheels in 2 to 10 densities (2 being very soft for plastics, wood and veneer work) to 10 being very hard for titanium and stainless steels. please send us an email or give us a call.
Similar products:
Do you want to use this material in a smaller form? Try our Unitized materials in mounted points and small mounted wheels.